|
- # Copyright 2021 Huawei Technologies Co., Ltd
- #
- # Licensed under the Apache License, Version 2.0 (the "License");
- # you may not use this file except in compliance with the License.
- # You may obtain a copy of the License at
- #
- # http://www.apache.org/licenses/LICENSE-2.0
- #
- # Unless required by applicable law or agreed to in writing, software
- # distributed under the License is distributed on an "AS IS" BASIS,
- # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- # See the License for the specific language governing permissions and
- # limitations under the License.
- # ============================================================================
-
- """Setup.py file."""
-
- import argparse
- import itertools
- import logging
- import multiprocessing
- import os
- import pathlib
- import platform
- import shutil
- import subprocess
- import sys
- import sysconfig
- from distutils.command.clean import clean # pylint: disable=deprecated-module
- from pathlib import Path
-
- import setuptools
- from setuptools.command.build_ext import build_ext
-
- sys.path.append(str(Path(__file__).parent.resolve()))
-
- from _build.utils import ( # pylint: disable=wrong-import-position # noqa: E402
- fdopen,
- get_cmake_command,
- get_executable,
- remove_tree,
- )
-
- # ==============================================================================
- # Helper variables
-
- on_rtd = os.environ.get('READTHEDOCS') == 'True'
- cur_dir = Path(__file__).resolve().parent
- ext_errors = (subprocess.CalledProcessError, FileNotFoundError)
- cmake_extra_options = []
-
- # ==============================================================================
- # Helper functions and classes
-
-
- def important_msgs(*msgs):
- """Print an important message."""
- print('*' * 75)
- for msg in msgs:
- print(msg)
- print('*' * 75)
-
-
- # ==============================================================================
-
-
- def get_python_executable():
- """Retrieve the path to the Python executable."""
- return get_executable(sys.executable)
-
-
- # ==============================================================================
-
-
- class BuildFailedError(Exception):
- """Extension raised if the build fails for any reason."""
-
- def __init__(self):
- """Initialize a BuildFailedError exception."""
- super().__init__()
- self.cause = sys.exc_info()[1] # work around py 2/3 different syntax
-
-
- # ==============================================================================
-
-
- class CMakeExtension(setuptools.Extension): # pylint: disable=too-few-public-methods
- """Class defining a C/C++ Python extension to be compiled using CMake."""
-
- def __init__(self, pymod, target=None, optional=False):
- """
- Initialize a CMakeExtension object.
-
- Args:
- src_dir (string): Path to source directory
- target (string): Name of target
- pymod (string): Name of compiled Python module
- optional (bool): (optional) If true, not building this extension is not considered an error
- """
- # NB: the main source directory is the one containing the setup.py file
- self.src_dir = Path().resolve()
- self.pymod = pymod
- self.target = target if target is not None else pymod.split('.')[-1]
-
- self.lib_filepath = str(Path(*pymod.split('.')))
- super().__init__(pymod, sources=[], optional=optional)
-
-
- # ------------------------------------------------------------------------------
-
-
- class CMakeBuildExt(build_ext):
- """Custom build_ext command class."""
-
- user_options = build_ext.user_options + [
- ('no-arch-native', None, 'Do not use the -march=native flag when compiling'),
- ('clean-build', None, 'Build in a clean build environment'),
- ('build-dir=', None, 'Specify a location for the build directory'),
- ('install-light', None, 'Install a "light" version of MindQuantum (ie. no development libraries)'),
- ]
-
- boolean_options = build_ext.boolean_options + ['no-arch-native', 'clean-build', 'install-light']
-
- def initialize_options(self):
- """Initialize all options of this custom command."""
- build_ext.initialize_options(self)
- self.no_arch_native = None
- self.clean_build = None
- self.build_dir = None
- self.install_light = None
-
- def finalize_options(self):
- """Finalize all options."""
- super().finalize_options()
- # pylint: disable=attribute-defined-outside-init
- self.no_arch_native = self.no_arch_native or False
- self.clean_build = self.clean_build or False
- self.build_dir = self.build_dir or None
- self.install_light = self.install_light or False
-
- def build_extensions(self):
- """Build a C/C++ extension using CMake."""
- # pylint: disable=attribute-defined-outside-init
- if on_rtd:
- important_msgs('skipping CMake build on ReadTheDocs and creating dummy extension packages')
- ext_suffix = sysconfig.get_config_var('EXT_SUFFIX')
- for ext in self.extensions:
- dest_path = pathlib.Path(self.get_ext_fullpath(ext.lib_filepath).rstrip(ext_suffix)).with_suffix('.py')
- if not dest_path.exists():
- logging.info('creating empty file at %s', dest_path)
- dest_path.write_text('', encoding='utf-8')
- return
- cmake_cmd = get_cmake_command()
- if cmake_cmd is None:
- raise RuntimeError('Unable to locate the CMake command!')
- self.cmake_cmd = [cmake_cmd]
- logging.info('using cmake command: %s', ' '.join(self.cmake_cmd))
-
- self.configure_extensions()
- build_ext.build_extensions(self)
- if not self.install_light:
- self.cmake_install()
-
- def configure_extensions(self):
- """Run a CMake configuration and generation step for one extension."""
- # pylint: disable=attribute-defined-outside-init
-
- def _src_dir_pred(ext):
- return ext.src_dir
-
- python_exec = get_python_executable()
- if not python_exec:
- raise RuntimeError('Unable to locate Python executable!')
- cmake_args = [
- '-DPython_EXECUTABLE:FILEPATH=' + python_exec,
- '-DBUILD_TESTING:BOOL=OFF',
- '-DIN_PLACE_BUILD:BOOL=OFF',
- '-DIS_PYTHON_BUILD:BOOL=ON',
- f'-DVERSION_INFO="{self.distribution.get_version()}"',
- f'-DMQ_PYTHON_PACKAGE_NAME:STRING={self.distribution.get_name()}',
- # NB: make sure that the install path is absolute!
- f'-DCMAKE_INSTALL_PREFIX:FILEPATH={Path(self.build_lib, Path().resolve().name).resolve()}',
- ] # yapf: disable
-
- if self.no_arch_native:
- cmake_args += ['-DUSE_NATIVE_INTRINSICS=OFF']
-
- cfg = 'Debug' if self.debug else 'Release'
- self.build_args = ['--config', cfg]
-
- if platform.system() == 'Windows':
- # self.build_args += ['--', '/m']
- pass
- else:
- cmake_args += ['-DCMAKE_BUILD_TYPE=' + cfg]
- if platform.system() == 'Darwin' and 'TRAVIS' in os.environ:
- self.build_args += ['--']
- else:
- self.build_args += [
- f'-j {self.parallel if self.parallel else multiprocessing.cpu_count()}',
- '--',
- ]
-
- cmake_args.extend(cmake_extra_options)
-
- env = os.environ.copy()
-
- # This can in principle handle the compilation of extensions outside the main CMake directory (ie. outside the
- # one containing this setup.py file)
- for src_dir, extensions in itertools.groupby(sorted(self.extensions, key=_src_dir_pred), key=_src_dir_pred):
- self.cmake_configure_build(str(src_dir), extensions, cmake_args, env)
-
- def cmake_configure_build(self, src_dir, extensions, cmake_args, env):
- """Run a CMake build command for a list of extensions."""
- args = cmake_args.copy()
- for ext in extensions:
- dest_path = Path(self.get_ext_fullpath(ext.lib_filepath)).resolve().parent
- args.append(f'-D{ext.target.upper()}_OUTPUT_DIR={dest_path}')
-
- build_temp = self._get_temp_dir(src_dir)
- if self.clean_build:
- remove_tree(build_temp)
- if not Path(build_temp).exists():
- Path(build_temp).mkdir(parents=True, exist_ok=True)
-
- build_temp = str(build_temp)
-
- logging.info(' Configuring from %s '.center(80, '-'), src_dir)
- logging.info('CMake command: %s', ' '.join(self.cmake_cmd + [src_dir] + args))
- logging.info(' cwd: %s', str(build_temp))
- try:
- subprocess.check_call(self.cmake_cmd + [src_dir] + args, cwd=build_temp, env=env)
- except ext_errors as err:
- raise BuildFailedError() from err
- finally:
- logging.info(' End configuring from %s '.center(80, '-'), src_dir)
-
- def build_extension(self, ext):
- """Build a single C/C++ extension using CMake."""
- cwd = self._get_temp_dir(Path(ext.src_dir).resolve().name)
- logging.info(f' Building {ext.pymod} '.center(80, '-'))
- logging.info(
- 'CMake command: %s', ' '.join(self.cmake_cmd + ['--build', '.', '--target', ext.target] + self.build_args)
- )
- logging.info(' cwd: %s', cwd)
- try:
- subprocess.check_call(
- self.cmake_cmd + ['--build', '.', '--target', ext.target] + self.build_args,
- cwd=cwd,
- )
- except ext_errors as err:
- if not ext.optional:
- raise BuildFailedError() from err
- logging.info('Failed to compile optional extension %s (not an error)', ext.pymod)
- finally:
- logging.info(' End building %s '.center(80, '-'), ext.pymod)
-
- def cmake_install(self):
- """Run the CMake installation step."""
- cwd = self._get_temp_dir(Path().resolve().name)
- logging.info(' Building CMake install target '.center(80, '-'))
- logging.info(
- 'CMake command: %s', ' '.join(self.cmake_cmd + ['--build', '.', '--target', 'install'] + self.build_args)
- )
- logging.info(' cwd: %s', cwd)
- try:
- subprocess.check_call(
- self.cmake_cmd + ['--build', '.', '--target', 'install'] + self.build_args,
- cwd=cwd,
- )
- finally:
- logging.info(' End building target install '.center(80, '-'))
-
- def copy_extensions_to_source(self):
- """Copy the extensions."""
- # pylint: disable=protected-access
-
- build_py = self.get_finalized_command('build_py')
- for ext in self.extensions:
- fullname = self.get_ext_fullname(ext.name)
- filename = Path(self.get_ext_filename(fullname))
- modpath = fullname.split('.')
- package = '.'.join(modpath[:-1])
- package_dir = build_py.get_package_dir(package)
- dest_filename = Path(package_dir, filename.name)
- src_filename = Path(self.build_lib, filename)
-
- # Always copy, even if source is older than destination, to ensure
- # that the right extensions for the current Python/platform are
- # used.
- if src_filename.exists() or not ext.optional:
- if self.dry_run or self.verbose:
- logging.info('copy %s -> %s', src_filename, dest_filename)
- if not self.dry_run:
- shutil.copyfile(src_filename, dest_filename)
- if ext._needs_stub:
- self.write_stub(str(package_dir) or os.curdir, ext, True)
-
- def get_outputs(self):
- """
- Get the list of files generated during a build.
-
- Mainly defined to properly handle optional extensions.
- """
- outputs = []
- for ext in self.extensions:
- if Path(self.get_ext_fullpath(ext.name)).exists() or not ext.optional:
- outputs.append(self.get_ext_fullpath(ext.name))
- return outputs
-
- def _get_temp_dir(self, src_dir):
- if self.build_dir:
- return self.build_dir
- return str(Path(self.build_temp, Path(src_dir).name))
-
-
- # ==============================================================================
-
-
- class Clean(clean):
- """Custom clean command."""
-
- def run(self):
- """Run the clean command."""
- # Execute the classic clean command
- clean.run(self)
- import glob # pylint: disable=import-outside-toplevel
-
- pkg_name = self.distribution.get_name().replace('-', '_')
- info = glob.glob(f'{pkg_name}.egg-info')
- if info:
- remove_tree(info[0])
-
-
- # ==============================================================================
-
-
- class GenerateRequirementFile(setuptools.Command):
- """A custom command to list the dependencies of the current."""
-
- description = 'List the dependencies of the current package'
- user_options = [
- ('include-all-extras', None, 'Include all extras_require into the list'),
- ('include-extras=', None, 'Include some of extras_requires into the list (comma separated)'),
- ('output=', 'o', 'Include some of extras_requires into the list (comma separated)'),
- ]
-
- boolean_options = ['include-all-extras']
-
- def initialize_options(self):
- """Initialize this command's options."""
- # pylint: disable=attribute-defined-outside-init
- self.include_extras = None
- self.include_all_extras = None
- self.output = None
- self.extra_pkgs = []
-
- def finalize_options(self):
- """Finalize this command's options."""
- # pylint: disable=attribute-defined-outside-init
- if not self.output:
- self.output = Path(__file__).parent.resolve() / 'requirements.txt'
- else:
- self.output = Path(self.output)
-
- if self.include_extras:
- include_extras = self.include_extras.split(',')
- else:
- include_extras = []
-
- try:
- for name, pkgs in self.distribution.extras_require.items():
- if self.include_all_extras or name in include_extras:
- self.extra_pkgs.extend(pkgs)
-
- except TypeError: # Mostly for old setuptools (< 30.x)
- for name, pkgs in self.distribution.command_options['options.extras_require'].items():
- if self.include_all_extras or name in include_extras:
- self.extra_pkgs.extend(pkgs)
-
- def run(self):
- """Execute this command."""
- with fdopen(str(self.output), 'w') as req_file:
- try:
- for pkg in self.distribution.install_requires:
- req_file.write(f'{pkg}\n')
- except TypeError: # Mostly for old setuptools (< 30.x)
- for pkg in self.distribution.command_options['options']['install_requires']:
- req_file.write(f'{pkg}\n')
- req_file.write('\n')
- for pkg in self.extra_pkgs:
- req_file.write(f'{pkg}\n')
-
-
- # ==============================================================================
-
- ext_modules = [
- CMakeExtension(pymod='mindquantum.mqbackend'),
- CMakeExtension(pymod='mindquantum.experimental._mindquantum_cxx', optional=True),
- CMakeExtension(pymod='mindquantum.experimental._mindquantum_cxx_core', optional=True),
- CMakeExtension(pymod='mindquantum.experimental._mindquantum_cxx_cengines', optional=True),
- ]
-
-
- # ==============================================================================
-
-
- class ArgsCMakeFlag(argparse.Action):
- """Custom argparse action for CMake flags."""
-
- def __call__(self, parser, namespace, values, option_string=None):
- """Call operator."""
- if isinstance(values, list):
- raise ValueError(f'values = {values} is a list! Only single value are currently supported!')
-
- cmake_extra_options.append(option_string)
- cmake_extra_options.append(values)
- setattr(namespace, self.dest, True)
-
-
- class ArgsCMakeDefinition(argparse.Action):
- """Custom argparse action to set boolean CMake variables."""
-
- def __init__(self, cmake_value, *args, **kwargs):
- """Initialize an ArgsCMakeDefinition object."""
- super().__init__(*args, **kwargs)
- self.cmake_value = bool(cmake_value)
-
- def __call__(self, parser, namespace, values, option_string=None):
- """Call operator."""
- if isinstance(values, list):
- raise ValueError(f'values = {values} is a list! Only single value are currently supported!')
-
- if self.cmake_value:
- cmake_extra_options.append(f'-D{values}:BOOL=ON')
- else:
- cmake_extra_options.append(f'-D{values}:BOOL=OFF')
-
-
- class ArgsCMakeVariable(argparse.Action):
- """Custom argparse action to set string CMake variables."""
-
- def __call__(self, parser, namespace, values, option_string=None):
- """Call operator."""
- if not isinstance(values, list) or len(values) != 2:
- parser.error(
- f'{option_string} expects 2 arguments, only {len(values)} provided! (make sure nargs is set properly)'
- )
- cmake_extra_options.append(f'-D{values[0]}:STRING={values[1]}')
-
-
- # ==============================================================================
-
- if __name__ == '__main__':
- remove_tree(Path(cur_dir, 'output'))
-
- arg_parser = argparse.ArgumentParser()
- arg_parser.add_argument('--set', action=ArgsCMakeDefinition, cmake_value=True)
- arg_parser.add_argument('--unset', action=ArgsCMakeDefinition, cmake_value=False)
- arg_parser.add_argument('--var', nargs=2, action=ArgsCMakeVariable)
- arg_parser.add_argument('-A', action=ArgsCMakeFlag)
- arg_parser.add_argument('-G', dest='cmake_generator', action=ArgsCMakeFlag)
-
- if 'bdist_wheel' in sys.argv:
- sys.argv.extend(arg.strip() for arg in os.environ.get('MQ_CIBW_BUILD_ARGS', '').split(',') if arg)
- parsed_args, unparsed_args = arg_parser.parse_known_args()
-
- sys.argv = sys.argv[:1] + unparsed_args
-
- # If no explicit CMake Generator specification, prefer MinGW Makefiles on Windows
- if (not parsed_args.cmake_generator) and (platform.system() == 'Windows'):
- cmake_extra_options += ['-G', 'MinGW Makefiles']
-
- setuptools.setup(
- cmdclass={
- 'build_ext': CMakeBuildExt,
- 'clean': Clean,
- 'gen_reqfile': GenerateRequirementFile,
- },
- ext_modules=ext_modules,
- )
|